Michael Rennick

Michael Rennick

Creator
0 followers

Aerospace engineer in commercial aviation (airliner repair design; performance engineering leadership); posts practitioner insights.

2023 Bolt EUV Hits 40k Miles, Still Trouble‑Free
SocialApr 21, 2026

2023 Bolt EUV Hits 40k Miles, Still Trouble‑Free

Our 2023 Bolt EUV just rolled over 40000 miles. It’s been fine. It does car stuff. It drives me the 31 miles too and from work without fuss. I’ve had to replace the cabin air filter. That’s it.

By Michael Rennick
Built $1B COVID Rescue Program in Weeks
SocialApr 20, 2026

Built $1B COVID Rescue Program in Weeks

April 20, 2020 was my first day as the GM of the project management team supporting the HR division of our little ATL based airline. As you can imagine, it was an intense and crazy time. Within a week or...

By Michael Rennick
Separate Negative Runs, Group Positives for Cleaner Circuit
SocialApr 12, 2026

Separate Negative Runs, Group Positives for Cleaner Circuit

Realized late this afternoon that I had messed up on the Enterprise. In an effort to reduce wiring and tidy things up and I had grouped the negative runs. The MOSFET switches that I’m using switch on the circuit via...

By Michael Rennick
Artemis II’s Success Sparks Excitement for Future Missions
SocialApr 9, 2026

Artemis II’s Success Sparks Excitement for Future Missions

I’m really happy to see all the love for Artemis II. I hope we can keep it going for the following missions. The fly by was great mission, but there is some spectacular stuff coming.

By Michael Rennick
Luna 3’s 1959 Far‑Side Photos Preview Artemis Terrain
SocialApr 6, 2026

Luna 3’s 1959 Far‑Side Photos Preview Artemis Terrain

The first images of the far side of the moon were taken by the Soviet Luna 3 probe in 1959. The probe used automatic sensing and film cameras to take the images. The film was developed onboard the spacecraft, the...

By Michael Rennick
Home 3D Printing Starter Guide—Basics, Not Brand Picks
SocialMar 24, 2026

Home 3D Printing Starter Guide—Basics, Not Brand Picks

Here is a 3D printing introduction guide for folks looking to get into it. I am assuming if you are looking at this it is for home use. Not commercial. I’m not all knowing here, so I hope others will...

By Michael Rennick
New Seasons Arrive: For All Mankind, Daredevil, Stranger Things
SocialMar 24, 2026

New Seasons Arrive: For All Mankind, Daredevil, Stranger Things

Folks, we have For All Mankind and Daredevil here soon and Stranger Things Tales from ‘85 in a month. There is reason to rejoice.

By Michael Rennick
Severe Weather Sparks Widespread Flight Delays, Stay Patient
SocialMar 16, 2026

Severe Weather Sparks Widespread Flight Delays, Stay Patient

Folks traveling by air today, it is going to be a day. MSP is digging out of a blizzard. A crazy, high speed front passed through ATL this morning. This disrupted the morning bank of flights and caused some international...

By Michael Rennick
Race Delayed: IRacing Update Stalls Thursday Night Blunder Post Postponed
SocialMar 13, 2026

Race Delayed: IRacing Update Stalls Thursday Night Blunder Post Postponed

I has sad. Supposed to be racing DWR Thursday Night Blunder on iracing. Logged in an hour ago. Still updating.

By Michael Rennick
Warp Nacelle Print Collapse Leaves Me with Spaghetti
SocialMar 4, 2026

Warp Nacelle Print Collapse Leaves Me with Spaghetti

Well dang. Bound to happen. Enterprise’s warp nacelle pylon’s fell during printing and I got spaghetti.

By Michael Rennick