M5Stack unveiled the Unit PoE‑P4, a 64 × 24 mm module that combines Espressif’s ESP32‑P4 RISC‑V SoC with IEEE 802.3at Power over Ethernet. The board packs 16 MB Flash, 32 MB PSRAM, a 10/100 Mbps Ethernet PHY, dual MIPI DSI/CSI interfaces, and dual USB‑C ports, delivering up to 6 W of PoE power. Development is supported through Arduino and ESP‑IDF, with full schematics and firmware available online. The unit is priced at $21.50, positioning it as a low‑cost solution for edge AI and IoT deployments.

Exaviz has introduced the Cruiser carrier board for the Raspberry Pi Compute Module 5, delivering an 8‑port PoE+ switch, 2.5 GbE WAN, NVMe storage, dual HDMI, USB connectivity, and ESP32‑C6 wireless. The lineup includes three variants: the full‑feature Cruiser with eight...
WINSYSTEMS introduced the SBC‑ZETA‑3950, a rugged mini single‑board computer built around Intel’s Atom Apollo Lake E3950 quad‑core processor. Housed in an 84 × 55 mm carrier, it delivers 1.6 GHz base speed (up to 2.0 GHz burst) within a 12 W power envelope and includes 8 GB...

AAEON announced that its UP Squared series now enjoys full mainline Linux support for the 40‑pin Raspberry Pi‑compatible GPIO header in kernel 6.18, ending reliance on an out‑of‑tree DKMS driver. The upstream effort, led with Bootlin, rewrote the driver stack to use...

OnLogic has unveiled the Factor 101, a compact fan‑less industrial edge system built around Qualcomm’s QCS6490 platform. The device packs an 8‑core Kryo 670 CPU up to 2.1 GHz, 8 GB LPDDR4x memory, 128 GB UFS storage and an integrated AI inference accelerator. Connectivity includes...

The ESP32 Bus Pirate, an ESP32‑S3 based debugging platform, received a major firmware update adding extensive protocol support, signal‑analysis tools, and new hardware compatibility. The release introduces a profile system, a Wizard pin‑activity analyzer, enhanced UART features with auto‑detection and...
Banana Pi has launched the BPI‑R4 Pro router board, built on MediaTek’s MT7988A (Filogic 880) quad‑core Cortex‑A73 SoC and supporting tri‑band Wi‑Fi 7. The board ships in two configurations – an 8 GB DDR4 “8X” model with dual 10 G SFP+ ports and a 4 GB DDR4...

The $99 BeaglePlay single‑board computer now boasts a fully upstream PowerVR Rogue GPU driver in the mainline Linux kernel and Mesa. This integration brings native Vulkan 1.2 support to the device, which is built on Texas Instruments' AM625 SoC featuring a...

Ezurio unveiled the Carbon AM62 system‑on‑module, a 45 × 30 mm OSM‑MF v1.2 board built around TI’s Sitara AM623/AM625 processors. The module packs a quad‑core Cortex‑A53 up to 1.4 GHz, alongside Cortex‑M4F, Cortex‑R5F and a dual‑core PRU for real‑time tasks, and offers optional Imagination...

Bit‑Brick has launched the K1 Pro single‑board computer, built on Rockchip’s RK3576 processor and equipped with a 6 TOPS INT8 neural‑processing unit. The board adds dual M.2 Key M slots for NVMe SSDs, HDMI 2.1 4K 120 fps output, and up to 8 GB LPDDR4X memory. Pricing starts...

The xSDR is a compact M.2 2230 A+E‑key SDR module that combines a Lime Microsystems LMS7002M transceiver with an AMD Artix‑7 FPGA. It delivers 2×2 MIMO RX/TX across a 30 MHz‑3.8 GHz range and supports both USB 2.0 and PCIe 2.0 ×2 host interfaces. Designed for laptops,...

Radxa unveiled the Cubie A7S, a 51 × 51 mm single‑board computer powered by the Allwinner A733 SoC. The board pairs dual Cortex‑A76 cores with six Cortex‑A55 cores, LPDDR5 memory up to 16 GB, and an integrated 3 TOPS NPU for edge‑AI workloads. It also...

Cangaroo is an open‑source CAN bus analyzer built for Linux, offering native integration with the SocketCAN stack and support for CAN‑FD. The desktop application captures, decodes, and visualizes traffic in real time, leveraging DBC databases and providing trace, graph, and...

DeepComputing announced the DC‑ROMA RISC‑V Mainboard III, an RVA23‑profile board designed for the Framework Laptop 13. The board uses the new SpacemiT K3 8‑core SoC, delivering up to 2.5 GHz and a 60 TOPS AI engine, and expands memory to 32 GB LPDDR5 with M.2 and...